Floodstop LogoStop flood damage before it really starts!

Floodstop is a point entry or point of use, leak detection and automatic water shut-off system designed for residential and commercial dwellings. It uses solid brass motorized valves to shut off the water supply whenever your appliance leaks!

What do the Floodstop Systems really do?

Utilizing solid brass water valves, the systems all operate in nearly the same manner.

Water Heater Example

Floodstop

1. A quick installation of the valves. UPC approved valves are Full-Port and offer zero flow restriction.

2. Upon leak detection, the controller automatically closes the valves and sounds an alert. Controller can be powered with AC and/or 4 C-size batteries.

FS V4 Controller

3. The water sensor is placed beneath the appliance where a leak is likely to occur.

FloodStop for Water Heater

Prevent Water Heaters from flooding your property:
Water Heaters have a limited life, then leak after years of corrosion. Water Heaters are generally considered a maintenance-free appliance, but they are also one of the single most damaging appliances in the home. Because Water Heaters are continually under pressure, even small pressurized leaks can quickly flood and devastate a home. Whether at home, at work, or on vacation these flooding events can go undetected for hours or even days.

FloodStop (FS 3/4-NPT), (FS 3/4-C), (FS 1.00-NPT), (FS 1.25-NPT) and (FS 1/2-NPT) kits automatically shut off the water supply to the Water Heater and sounds an alarm, leaving all other household fixtures and appliances operational. Powered by AC/DC Adaptor/Transformer or Batteries. Output contact available, which allows the Controller to connect with Alarm, Home Automation or Auto-Dialer systems if desired. Easily installed in fifteen minutes.

FS 3/4-NPT KitFloodStop (FS 3/4-NPT)

  • Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded)
  • Control Unit (with Battery Backup 4 X AA Size)
  • Water/Leak Sensor (1.25” X 7.5”)
  • AC/DC Power Adaptor (or use 4 X AA Batteries as Primary Power Source)
  • Output Contact Wires (2)
  • Specification Sheet (find the link in right margin of this webpage)

FloodStop for Washing Machine

Prevent flooding from failed Washing Machines and hoses:
Washing Machines are one of the most damaging appliances within the home. Washing Machine related flooding can happen at any time, from hoses with ruptures or failed fill switches, to cracked fittings, internal failures from clamps, valves, pumps and drains. Whether at home, at work, or on vacation these flooding events go undetected for hours or even days.

FloodStop (FS 3/4-H90) and (FS 3/4-H) kits automatically shuts off the water supply to the Washing Machine and sounds an alarm, leaving all other household fixtures and appliances operational. Powered by AC/DC Adaptor/Transformer or Batteries. Output contact available, which allows the Controller to connect with Alarm, Home Automation or Auto-Dialer systems if desired. Easily installed in ten minutes.

 

FloodStop (FS 3/4-H90)

  • FS 3/4-NPT KitMotorized Ball Valves (Two Valves, 3/4 Inch Hose Threaded with Spinning Collars) and “90 Degree” Downward Outlet
  • 90 Degree Downward Outlet Style Valves (common for recessed wall-boxes with outward facing hose bibs)
  • Control Unit (with Battery Backup 4 X AA Size)
  • Water/Leak Sensor (1.25” X 7.5”)
  • AC/DC Power Adaptor (or use 4 X AA Batteries as Primary Power Source)
  • Output Contact Wires (2)

 

 

 

Floodstop Product Valves
Save space with Floodstop's Angled Motorized Ball Valves

Five Reasons to Choose Floodstop:

  1. Floodstop is the only product of its kind that uses solid brass, motorized ball valves for every appliance in your home.
  2. Units are powered by AC, batteries, or both.
  3. Water Heater unites are full port valves, with zero pressure restriction and UPC approval.
  4. Automatic monthly cycling of the valves.
  5. Named one of Readers Digest Top 100 New Products of 2004

 

Specifications